Inch cam follower(inch stud type track roller), heavy stud, crowned OD, hexagon socket, sealed, CCFH-1 3/4-SB, CH-56-LW
| D | 44.45 mm | Outside diameter |
| d | 25.4 mm | Stud diameter |
| B | 70.6 mm | Overall width |
| C | 25.4 mm | Outer ring width |
| B1 | 44.5 mm | Length shank on stud |
| B2 | 11.1125 mm | Distance lubrication hole to flange ring |
| C1 | 0.8 mm | Distance face outer ring to face thrust washer |
| d1 | 31.75 mm | Outside diameter flange ring |
| G | 1-14 | Thread stud |
| G1 | 22.225 mm | Thread length |
| M | 4.7625 mm | Seat diameter for lubrication accessories |
| M1 | 3.175 mm | Diameter of lubrication hole (shank) |
| SW | 7.937 mm | Width across flats |
| Fr | 28400 kN | Maximum dynamic radial load |
| F0r | 70456 kN | Maximum static radial load |
| nD G | 2200 r/min | Limiting speed |
| ≈m | 0.45 kg | Weight |
| Crowned | Outer ring profile | |
| Full complement roller | Roller guide | |
| Heavy duty,Centric | Stud type | |
| Axial plain washer | Sealing type | |
| 52100 | 100Cr6 | Outer ring material | |
| 52100 | 100Cr6 | Roller material | |
| 20CrMo (ASTM4118, SCM420) | Stud material | |
| Lithium Soap Grease NLGI #2 | Grease |
| Hex | Mouting hole | |
| 3/16” Alemite Fitting | Grease fitting | |
| 141.25 Nm | Recommended tightening torque |
| -30ºC to + 80ºC | Temperature range °C | |
| -22ºF to + 176ºF | Temperature range °F |
| Mc.GILL | RBC | IKO | SMITH | Carter |
| CCFH-1 3/4-SB | CH-56-LW | CRH 28 VBUUR | HR-1 3/4-XBC | CCNBH-56-SB |
